Uranium U · 92

A heavy, faintly radioactive metal whose nucleus can be split, releasing about two million times more energy per kilogram than burning coal.

Tại sao điều này quan trọng?

Nuclear power supplies roughly a tenth of the world's electricity and around a quarter of its low-carbon electricity, all from this one element.

Where it is in the Earth

Uranium is a naturally occurring element, present in small amounts throughout the Earth's crust. It sits at the heavy end of the periodic table, and like most heavy elements it was forged inside dying stars and delivered to the early Earth by asteroid bombardment. In its dispersed state it is actually more abundant in the crust than silver or mercury, but at those background concentrations it cannot be mined economically. What geologists look for is any process that has gathered uranium from a large volume of rock and concentrated it into a much smaller one.

Several quite different geological processes can do this. The most productive, measured by the grades it achieves, is the unconformity-related deposit, formed where ancient, uranium-bearing groundwaters migrated through permeable sandstone and then encountered a sharp chemical boundary — an unconformity, meaning the old erosion surface where one rock sequence rests on a completely different one beneath. The chemical contrast caused dissolved uranium to precipitate as the mineral uraninite, also known as pitchblende, in veins and pods that can reach extraordinary concentrations. The deposits around the Athabasca Basin in northern Canada are the type example, with grades that can exceed fifteen percent uranium, a figure essentially unmatched anywhere else in the world.

Other important deposit styles include sandstone-hosted deposits, where uranium is caught in permeable sedimentary layers by a chemical reducing agent such as organic material or iron sulfide minerals. These are lower grade but often occur in flat-lying sedimentary basins that are well suited to a particular extraction method discussed in the next section. A third style is the iron-oxide copper-gold deposit, or IOCG, of which Olympic Dam in South Australia is the largest known example; uranium there is a secondary product recovered alongside copper, gold and silver from a single enormous orebody deep underground. A fourth occurrence is the ancient Witwatersrand conglomerate reefs of South Africa, where uranium accumulated alongside gold in fossil river gravels more than two billion years ago. Each deposit type reflects a different chapter of geological history, which is why major uranium mines are scattered across geologically distinct terrains rather than concentrated in one belt.

Getting it out

The method used to extract uranium depends almost entirely on the geometry and grade of the deposit and on what lies above it. Where ore is shallow and the ground above it can be economically stripped away, open-pit mining is used: large shovels and haul trucks remove the overlying rock — called overburden — and then work down through the ore. Where ore sits deep or in narrow high-grade veins, underground mining is necessary, which means driving tunnels and extracting rock in enclosed workings. Because uranium ore is radioactive, underground mines require careful ventilation to prevent the accumulation of radon gas, a radioactive decay product.

Cigar Lake in northern Canada illustrates a third approach forced by unusual conditions. The ore there is so rich and the surrounding rock so water-saturated that conventional drilling and blasting would be dangerous. Instead the ground is frozen artificially and ore is cut by a high-pressure water jet — a technique called jet boring — producing a slurry that is pumped to the surface without workers ever entering the ore zone directly. This adds cost but the extraordinary grade of the deposit makes it worthwhile.

A fourth method, and the one that has grown most rapidly in recent decades, is in-situ recovery, sometimes called in-situ leaching or ISL. Rather than physically excavating rock, operators drill a pattern of injection and recovery wells into a permeable uranium-bearing sandstone aquifer. A mildly acidic or alkaline solution is pumped down the injection wells, dissolves the uranium from the surrounding rock, and is then pumped back up through the recovery wells as a uranium-bearing liquid. No ore is brought to surface; no tailings heap is created. This works only in the right kind of sandstone geology, and the long-term behaviour of the underground chemistry requires careful management, but where conditions allow it the cost per tonne of product can be substantially lower than conventional mining. Kazakhstan, the world's largest uranium producer, relies almost entirely on this method.

Grade matters more in uranium mining than in most other extractive industries because uranium ore is handled, transported and processed under radiological controls that add cost regardless of grade. A deposit producing a few hundredths of a percent uranium requires moving large volumes of rock to yield a small amount of metal, whereas the high-grade Canadian unconformity deposits yield many times more product per tonne of ore mined. The ratio of waste rock removed to ore extracted — the strip ratio in open-pit operations — is one of the key numbers that determines whether a deposit can be mined at a profit.

What pulls on it

Effectively all commercial demand for uranium exists because of nuclear power. A nuclear power station burns no fuel in the chemical sense; instead, neutrons cause uranium-235 nuclei to split — a process called fission — releasing heat that drives steam turbines just as coal or gas would. The amount of uranium required to produce a given quantity of electricity is small by mass compared with fossil fuels, but it is not trivial in terms of the specialised processing chain needed to prepare it. A pressurised water reactor, the most common type in service today, requires somewhere between 150 and 250 tonnes of natural uranium per gigawatt of electrical capacity per year of operation, according to the figures this page carries.

Demand is therefore a function of how many reactors are operating, at what capacity, and what kind of fuel cycle they use. Reactors are long-lived assets: once built, a plant may operate for sixty years, requiring a reliable fuel supply for that entire period. Utilities typically hold multi-year contracts and strategic inventories rather than buying uranium on short notice, which means the spot market represents only a fraction of actual transactions and spot prices can move sharply on relatively small volumes of trade.

The direction of demand over the coming decades depends on decisions being made now about new reactor construction. Several countries that reduced nuclear capacity after the Fukushima accident in 2011 are reconsidering those decisions in the context of electricity grid decarbonisation. A number of countries are building new large reactors, and a separate strand of development involves smaller modular reactor designs that have not yet reached commercial deployment at scale. If nuclear capacity grows, uranium demand grows with it; if planned reactors are delayed or cancelled — as has happened repeatedly in different countries over the past four decades — demand growth is correspondingly deferred. There is no significant use of uranium outside nuclear applications that would change the demand picture independently.